[ESS] ESS 18.10-1 patch released

Vitalie Spinu @p|nuv|t @end|ng |rom gm@||@com
Thu Oct 25 09:21:36 CEST 2018


Do you mean MELPA stable? I do see a git tag 18.10-1 but it's probably not
recognized by MELPA. We need 18.10.1 instead.

  Vitalie

>> On Wed, Oct 24 2018 12:26, William McCoy via ESS-help wrote:

> This newest release, ESS 18.10-1, does not yet appear on MELPA yet.  Is it on
> its way there?

> On 10/23/18 3:37 PM, Martin Maechler via ESS-help wrote:
>> The ESS 18.10 release (of 3 days ago) had shown some small but
>> obnoxious problems  which have been fixed now, and hence we have
>> created a patch release (to 18.10),  18.10-1  which should use
>> *instead* of 18.10.
>>
>> Download from "Downloads" on https://ess.r-project.org/ or also
>> directly at     https://stat.ethz.ch/ESS/downloads/ess/?C=M;O=D>
>> -------------
>>
>> Relatedly, I'm happy to note explicitly that the ESS
>> core team has a new active and very competent member,
>> J. Alexander (Alex) Branham.
>>
>> He's been actively contributing already starting as early as
>> March 2017, and has been formally and successfully invited to
>> join the ESS core on Sep 6, 2018.
>>
>> We're all happy and grateful to be to have him on board!
>>
>> -------------
>>
>> The only new entry in the 'new features' list is
>>
>> Changes and New Features in 18.10-1:
>>
>>     * New functions 'ess-eval-line-visibly-and-step' ('C-c C-n' and
>>       'ess-eval-region-or-line-visibly-and-step' ('C-RET') which behave
>>       as the old versions of 'ess-eval-line-and-step' and
>>       'ess-eval-region-or-line-and-step'.
>>
>> In the name of the ESS core team,
>> Martin Maechler
>>
>>
>>>>>>> Martin Maechler via ESS-help
>>>>>>>      on Sat, 20 Oct 2018 22:29:21 +0200 writes:
>>
>>> Dear ESS Users
>>> it's a pleasure to announce the release of
>>>
>>>       ESS 18.10 (2018 October)
>>>
>>> of a few minutes ago in the name of the ESS core team.
>>>
>>> There have been many changes and improvements since the last
>>> official release 17.11 (in last November)
>>>
>>> For the complete list of (documented) new features and bug
>>> fixes, read the following (beginning of file 'ANNOUNCE') to the end.
>>>
>>> In the name of the ESS core team, with thanks to all helpers,
>>> notably by github pull requests,
>>>
>>> Martin Maechler, ETH Zurich
>>>
>>>
>>>
>>> 1 ANNOUNCING ESS
>>> ****************
>>>
>>> The ESS Developers proudly announce the release of ESS 18.10
>>>
>>>     Emacs Speaks Statistics (ESS) provides an intelligent, consistent
>>> interface between the user and the software.  ESS interfaces with
>>> R/S-PLUS, SAS, BUGS/JAGS, Stata and other statistical analysis packages
>>> under the UNIX, GNU Linux, Microsoft Windows, macOS and other operating
>>> systems.  ESS is a package for the GNU Emacs and XEmacs text editors
>>> whose features ESS uses to streamline the creation and use of
>>> statistical software.  ESS knows the syntax and grammar of statistical
>>> analysis packages and provides consistent display and editing features
>>> based on that knowledge.  ESS assists in interactive and batch execution
>>> of statements written in these statistical analysis languages.
>>>
>>>     ESS is freely available under the GNU General Public License (GPL).
>>> Please read the file COPYING which comes with the distribution, for more
>>> information about the license.  For more detailed information, please
>>> read the README files that come with ESS.
>>>
>>> 1.1 Getting the Latest Version
>>> ==============================
>>>
>>> ESS supports GNU Emacs versions 24.3 and newer.
>>>
>>>     ESS is most likely to work with current/recent versions of the
>>> following statistical packages: R/S-PLUS, SAS, Stata, OpenBUGS and JAGS.
>>>
>>>     To build the PDF documentation, you will need a version of TeX Live
>>> or texinfo that includes texi2dvi.
>>>
>>>     There are two main methods used for installing ESS. You may install
>>> from a third-party repository or from source code.  Once you install it,
>>> you must also activate or load ESS in each Emacs session, though
>>> installation from a third-party repository likely takes care of that for
>>> you.  See *note Activating and Loading ESS:: for more details.
>>>
>>> 1.2 Installing from a third-party repository
>>> ============================================
>>>
>>> ESS is packaged by many third party repositories.  Many GNU/Linux
>>> distributions package it, usually with the name "emacs-ess" or similar.
>>>
>>>     ESS is also available through Milkypostman’s Emacs Lisp Package
>>> Archive (MELPA), a popular repository for Emacs packages.  Instructions
>>> on how to do so are found on MELPA's website (https://melpa.org/).>> MELPA also hosts MELPA-stable with stable ESS builds.  You may choose
>>> between MELPA with the latest and greatest features (and bugs) or
>>> MELPA-stable, which may lag a bit behind but should be more stable.
>>>
>>>     After installing, users should make sure ESS is activated or loaded
>>> in each Emacs session.  See *note Activating and Loading ESS::.
>>> Depending on install method, this may be taken care of automatically.
>>>
>>> 1.3 Installing from source
>>> ==========================
>>>
>>> Stable versions of ESS are available at the ESS web page
>>> (https://ess.r-project.org) as a .tgz file or .zip file.  ESS releases
>>> are GPG-signed, you should check the signature by downloading the
>>> accompanying '.sig' file and doing:
>>>
>>>       gpg --verify ess-18.10.tgz.sig
>>>
>>>     Alternatively, you may download the git repository.  ESS is currently
>>> hosted on Github: <https://github.com/emacs-ess/ESS>.  'git clone
>>> https://github.com/emacs-ess/ESS.git' will download it to a new
>>> directory 'ESS' in the current working directory.
>>>
>>>     We will refer to the location of the ESS source files as
>>> '/path/to/ESS/' hereafter.
>>>
>>>     After installing, users should make sure they activate or load ESS in
>>> each Emacs session, see *note Activating and Loading ESS::
>>>
>>>     Optionally, compile elisp files, build the documentation, and the
>>> autoloads:
>>>       cd /path/to/ESS/
>>>       make
>>>     Without this step the documentation, reference card, and autoloads
>>> will not be available.  Uncompiled ESS will also run slower.
>>>
>>>     Optionally, you may make ESS available to all users of a machine by
>>> installing it site-wide.  To do so, run 'make install'.  You might need
>>> administrative privileges:
>>>
>>>       make install
>>>
>>>     The files are installed into '/usr/share/emacs' directory.  For this
>>> step to run correctly on macOS, you will need to adjust the 'PREFIX'
>>> path in 'Makeconf'.  The necessary code and instructions are commented
>>> in that file.
>>>
>>> 1.4 Activating and Loading ESS
>>> ==============================
>>>
>>> After installing ESS, you must activate or load it each Emacs session.
>>> ESS can be autoloaded, and if you used a third-party repository (such as
>>> your Linux distribution or MELPA) to install, you can likely skip this
>>> section and proceed directly to *note Check Installation::
>>>
>>>     Otherwise, you may need to add the path to ESS to 'load-path' with:
>>>
>>>       (add-to-list 'load-path "/path/to/ESS/lisp")
>>>
>>>     You then need to decide whether to take advantage of deferred loading
>>> (which will result in a faster Emacs startup time) or require ESS when
>>> Emacs is loaded.  To autoload ESS when needed (note that if installed
>>> from source, you must have run 'make'):
>>>
>>>       (load "ess-autoloads")
>>>
>>>     To require ESS on startup, you can either put
>>>
>>>       (require 'ess-site)
>>>
>>>     or
>>>
>>>       (require 'ess-r-mode)
>>>
>>>     In your configuration file, depending on whether you want all ESS
>>> features or only R related features.
>>>
>>> 1.5 Check Installation
>>> ======================
>>>
>>> Restart Emacs and check that ESS was loaded from a correct location with
>>> 'M-x ess-version'.
>>>
>>> 1.6 Current Features
>>> ====================
>>>
>>>     * Languages Supported:
>>>          * S family (R, S, and S+ AKA S-PLUS)
>>>          * SAS
>>>          * BUGS/JAGS
>>>          * Stata
>>>          * Julia
>>>     * Editing source code (S family, SAS, BUGS/JAGS, Stata, Julia)
>>>          * Syntactic indentation and highlighting of source code
>>>          * Partial evaluation of code
>>>          * Loading and error-checking of code
>>>          * Source code revision maintenance
>>>          * Batch execution (SAS, BUGS/JAGS)
>>>          * Use of imenu to provide links to appropriate functions
>>>     * Interacting with the process (S family, SAS, Stata, Julia)
>>>          * Command-line editing
>>>          * Searchable Command history
>>>          * Command-line completion of S family object names and file
>>>            names
>>>          * Quick access to object lists and search lists
>>>          * Transcript recording
>>>          * Interface to the help system
>>>     * Transcript manipulation (S family, Stata)
>>>          * Recording and saving transcript files
>>>          * Manipulating and editing saved transcripts
>>>          * Re-evaluating commands from transcript files
>>>     * Interaction with Help Pages and other Documentation (R)
>>>          * Fast Navigation
>>>          * Sending Examples to running ESS process.
>>>          * Fast Transfer to Further Help Pages
>>>     * Help File Editing (R)
>>>          * Syntactic indentation and highlighting of source code.
>>>          * Sending Examples to running ESS process.
>>>          * Previewing
>>>
>>> 1.7 Requirements
>>> ================
>>>
>>> ESS supports GNU Emacs versions 24.3 and newer.
>>>
>>>     ESS is most likely to work with current/recent versions of the
>>> following statistical packages: R/S-PLUS, SAS, Stata, OpenBUGS and JAGS.
>>>
>>>     To build the PDF documentation, you will need a version of TeX Live
>>> or texinfo that includes texi2dvi.
>>>
>>> 1.8 Mailing List
>>> ================
>>>
>>> There is a mailing list for discussions and announcements relating to
>>> ESS. Join the list by sending an e-mail with "subscribe ess-help" (or
>>> "help") in the body to <ess-help-request using r-project.org>; contributions
>>> to the list may be mailed to <ess-help using r-project.org>.  Rest assured,
>>> this is a fairly low-volume mailing list.
>>>
>>>     The purposes of the mailing list include
>>>
>>>     * helping users of ESS to get along with it.
>>>     * discussing aspects of using ESS on Emacs and XEmacs.
>>>     * suggestions for improvements.
>>>     * announcements of new releases of ESS.
>>>     * posting small patches to ESS.
>>>
>>> 1.9 Reporting Bugs
>>> ==================
>>>
>>> Please send bug reports, suggestions etc.  to <ESS-bugs using r-project.org>,
>>> or post them on our github issue tracker
>>> (https://github.com/emacs-ess/ESS/issues)>>
>>>     The easiest way to do this is within Emacs by typing
>>>
>>>     'M-x ess-submit-bug-report'
>>>
>>>     This also gives the maintainers valuable information about your
>>> installation which may help us to identify or even fix the bug.
>>>
>>>     If Emacs reports an error, backtraces can help us debug the problem.
>>> Type "M-x set-variable RET debug-on-error RET t RET". Then run the
>>> command that causes the error and you should see a *Backtrace* buffer
>>> containing debug information; send us that buffer.
>>>
>>>     Note that comments, suggestions, words of praise and large cash
>>> donations are also more than welcome.
>>>
>>> 1.10 Authors
>>> ============
>>>
>>>     * A.J. Rossini (mailto:blindglobe using gmail.com)
>>>     * Richard M. Heiberger (mailto:rmh using temple.edu)
>>>     * Kurt Hornik (mailto:Kurt.Hornik using R-project.org)
>>>     * Martin Maechler (mailto:maechler using stat.math.ethz.ch)
>>>     * Rodney A. Sparapani (mailto:rsparapa using mcw.edu)
>>>     * Stephen Eglen (mailto:stephen using gnu.org)
>>>     * Sebastian P. Luque (mailto:spluque using gmail.com)
>>>     * Henning Redestig (mailto:henning.red using googlemail.com)
>>>     * Vitalie Spinu (mailto:spinuvit using gmail.com)
>>>     * Lionel Henry (mailto:lionel.hry using gmail.com)
>>>     * J. Alexander Branham (mailto:alex.branham using gmail.com)
>>>
>>> 1.11 License
>>> ============
>>>
>>> The source and documentation of ESS is free software.  You can
>>> redistribute it and/or modify it under the terms of the GNU General
>>> Public License as published by the Free Software Foundation; either
>>> version 2, or (at your option) any later version.
>>>
>>>     ESS is distributed in the hope that it will be useful, but WITHOUT
>>> ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License in
>>> the file COPYING in the same directory as this file for more details.
>>>
>>> 1.12 New Features
>>> =================
>>>
>>> Changes and New Features in 18.10:
>>>
>>>     * This is the last release to support Emacs older than 25.1.  Going
>>>       forward, only GNU Emacs 25.1 and newer will be supported.  Soon
>>>       after this release, support for older Emacs versions will be
>>>       dropped from the git master branch.  Note that MELPA uses the git
>>>       master branch to produce ESS snapshots, so if you are using Emacs <
>>>       25.1 from MELPA and are unable to upgrade, you should switch to
>>>       MELPA-stable.
>>>
>>>     * ESS now displays the language dialect in the mode-line.  So, for
>>>       example, R buffers will now show ESS[R] rather than ESS[S].
>>>
>>>     * The ESS manual has been updated and revised.
>>>
>>>     * The ESS initialization process has been further streamlined.  If
>>>       you update the autoloads (which installation from 'package-install'
>>>       does), you should not need to '(require 'ess-site)' at all, as
>>>       autoloads should automatically load ESS when it is needed (e.g.
>>>       the first time an R buffer is opened).  In order to defer loading
>>>       your ESS config, you may want to do something like
>>>       '(with-require-after-load "ess" <ess-config-here>)' in your Emacs
>>>       init file.  Users of the popular 'use-package' Emacs package can
>>>       now do '(use-package ess :defer t)' to take advantage of this
>>>       behavior.  *Note (ess)Activating and Loading ESS:: for more
>>>       information on this feature.
>>>
>>>     * ESS now respects Emacs conventions for keybindings.  This means
>>>       that The 'C-c [letter]' bindings have been removed.  This affects
>>>       'C-c h', which was bound to 'ess-eval-line-and-step-invisibly' in
>>>       'sas-mode-local-map'; 'C-c f', which was bound to
>>>       'ess-insert-function-outline' in 'ess-add-MM-keys'; and 'C-c h',
>>>       which was bound to 'ess-handy-commands' in 'Rd-mode-map',
>>>       'ess-noweb-minor-mode-map', and 'ess-help-mode-map'
>>>
>>>     * ESS[R]: 'ess-r-package-use-dir' now works with any mode.  This sets
>>>       the working directory to the root of the current package including
>>>       for example C or C++ files within '/src').
>>>
>>>     * ESS[R]: Long + + prompts in the inferior no longer offset output.
>>>
>>>     * ESS[R]: New option 'strip' for 'inferior-ess-replace-long+'.  This
>>>       strips the entire + + sequence.
>>>
>>>     * ESS modes now inherit from 'prog-mode'.  In the next release, ESS
>>>       modes will use 'define-derived-mode' so that each mode will have
>>>       (for example) its own hooks and keymaps.
>>>
>>>     * ESS[R]: Supports flymake in R buffers for Emacs 26 and newer.
>>>       Users need to install the 'lintr' package to use it.  Customizable
>>>       options include 'ess-use-flymake', 'ess-r-flymake-linters', and
>>>       'ess-r-flymake-lintr-cache'.
>>>
>>>     * ESS[R]: Gained support for xref in Emacs 25+.  *Note (emacs)Xref::
>>>
>>>     * ESS[R]: The startup screen is cleaner.  It also displays the
>>>       startup directory with an explicit 'setwd()'.
>>>
>>>     * ESS[R]: Changing the working directory is now always reflected in
>>>       the process buffer.
>>>
>>>     * ESS[R]: 'Makevars' files open with 'makefile-mode'.
>>>
>>>     * New variable 'ess-write-to-dribble'.  This allows users to disable
>>>       the dribble ('*ESS*') buffer if they wish.
>>>
>>>     * All of the '*-program-name' variables have been renamed to
>>>       '*-program'.  Users who previously customized e.g.
>>>       'inferior-ess-R-program-name' will need to update their
>>>       customization to 'inferior-ess-R-program'.  These variables are
>>>       treated as risky variables.
>>>
>>>     * 'ess-smart-S-assign' was renamed to 'ess-insert-assign'.  It
>>>       provides similar functionality but for any keybinding, not just
>>>       '_'.  For instance if you bind it to ';', repeated invokations
>>>       cycle through between assignment and inserting ';'.
>>>
>>>     * 'C-c C-=' is now bound to 'ess-cycle-assign' by default.  See the
>>>       documentation for details.  New user customization option
>>>       'ess-assign-list' controls which assignment operators are cycled.
>>>
>>>     * ESS[R] In remote sessions, the ESSR package is now fetched from
>>>       GitHub.
>>>
>>>     * Commands that send the region to the inferior process now deal with
>>>       rectangular regions.  See the documentation of 'ess-eval-region'
>>>       for details.  This only works on Emacs 25.1 and newer.
>>>
>>>     * ESS[R]: Improvements to interacting with iESS in non-R files.
>>>       Interaction with inferior process in non-R files within packages
>>>       (for instance C or C++ files) has been improved.  This is a work in
>>>       progress.
>>>
>>>     * ESS[R]: Changing the working directory is now always reflected in
>>>       the process buffer.
>>>
>>>     * ESS[JAGS]: *.jog and *.jmd files no longer automatically open in
>>>       JAGS mode.
>>>
>>>     Many improvements to fontification:
>>>
>>>     * Improved customization for faces.  ESS now provides custom faces
>>>       for (nearly) all faces used and places face customization options
>>>       into their own group.  Users can customize these options using 'M-x
>>>       customize-group RET ess-faces'.
>>>
>>>     * Many new keywords were added to 'ess-R-keywords' and
>>>       'ess-R-modifiers'.  See the documentation for details.
>>>
>>>     * ESS[R]: 'in' is now only fontified when inside a 'for' construct.
>>>       This avoids spurious fontification, especially in the output buffer
>>>       where 'in' is a commond English word.
>>>
>>>     * ESS: Font-lock keywords are now generated lazily.  That means you
>>>       can now add or remove keywords from variables like 'ess-R-keywords'
>>>       in your Emacs configuration file after loading ESS (i.e.  in the
>>>       ':config' section for 'use-package' users).
>>>
>>>     * ESS[R]: Fontification of roxygen '@param' keywords now supports
>>>       comma-separated parameters.
>>>
>>>     * ESS[R]: Certain keywords are only fontified if followed by a
>>>       parenthesis.  Function-like keywords such as 'if ()' or 'stop()'
>>>       are no longer fontified as keyword if not followed by an opening
>>>       parenthesis.  The same holds for search path modifiers like
>>>       'library()' or 'require()'.
>>>
>>>     * ESS[R]: Fixed fontification toggling.  Especially certain syntactic
>>>       elements such as '%op%' operators and backquoted function
>>>       definitions.
>>>
>>>     * ESS[R]: 'ess-font-lock-toggle-keyword' can be called interactively.
>>>       This command asks with completion for a font-lock group to toggle.
>>>       This functionality is equivalent to the font-lock menu.
>>>
>>>     Notable bug fixes:
>>>
>>>     * 'prettify-symbols-mode' no longer breaks indentation.  This is
>>>       accomplished by having the pretty symbols occupy the same number of
>>>       characters as their non-pretty cousins.  You may customize the new
>>>       variable 'ess-r-prettify-symbols' to control this behavior.
>>>
>>>     * ESS: Inferior process buffers are now always displayed on startup.
>>>       Additionally, they don't hang Emacs on failures.
>>>
>>>     Obsolete libraries, functions, and variables:
>>>
>>>     * The 'ess-r-args.el' library has been obsoleted and will be removed
>>>       in the next release.  Use 'eldoc-mode' instead, which is on by
>>>       default.
>>>
>>>     * Functions and options dealing with the smart assign key are
>>>       obsolete.  The following functions have been made obsolete and will
>>>       be removed in the next release of ESS: 'ess-smart-S-assign',
>>>       'ess-toggle-S-assign', 'ess-toggle-S-assign-key',
>>>       'ess-disable-smart-S-assign'.
>>>
>>>       The variable 'ess-smart-S-assign-key' is now deprecated and will be
>>>       removed in the next release.  If you would like to continue using
>>>       '_' for insterting assign in future releases, please bind
>>>       'ess-insert-assign' in 'ess-mode-map' the normal way.
>>>
>>>     * ESS[S]: Variable 'ess-s-versions-list' is obsolete and ignored.
>>>       Use 'ess-s-versions' instead.  You may pass arguments by starting
>>>       the inferior process with the universal argument.
>>>
>>>
>>>     Changes and New Features in 17.11:
>>>
>>>     ..............
>>>     ..............
>>
>> ______________________________________________
>> ESS-help using r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/ess-help>




More information about the ESS-help mailing list