[ESS] remote R execution via tramp hangs
Vitalie Spinu
spinuvit at gmail.com
Mon Sep 29 20:44:14 CEST 2014
If that's the problem then the R buffer should have been created and
displayed a message that the executable was not found. Not popped up
doesn't mean it wasn't created.
Vitalie
>>> Jannis on Mon, 29 Sep 2014 16:54:54 +0200 wrote:
> OK, i got this solved. It was a problem with my settings for ess. The path to R
> differs on my local computer and the remote machine. I now set this variable:
> (setq inferior-R-program-name "/usr/local/apps/R/R-3.1.1/bin/R")
> and created a soft link on my local machine so that it mimics the paths on the
> remote computer. I vaguely remember asking a related question here but forgot
> about this when I now updated my system and installed a new version of R.
> Thanks for your help, Vitalie and Chris!
> Jannis
> On 29.09.2014 16:19, Jannis wrote:
>>
>> M-x shell, M-x run-python works. the buffer called *tramp/ssh remotecomputer*
>> does not show anything. I can not find any buffer called *tramp/ssh*
>> . Am I looking at the correct buffer?
>>
>>
>> Thanks
>> Jannis
>>
>>
>>
>>
>> On 29.09.2014 12:05, Vitalie Spinu wrote:
>>> Ok. so it's not even getting to R. It's your most likely your tramp. See
>>> the *tramp/ssh* buffer. You might see some clues there.
>>>
>>> Also try running something else on remote, M-x shell, M-x run-python
>>> etc.
>>>
>>> Vitalie
>>>
>>> >>> Jannis on Mon, 29 Sep 2014 11:24:40 +0200 wrote:
>>>
>>> > I get this in *messages*:
>>>
>>> > Tramp: Waiting for prompts from remote shell
>>> > Tramp: Sending command `exec ssh -q -e none PC028'
>>> > Tramp: Found remote shell prompt on `PC028'
>>> > Tramp: Opening connection for PC028 using ssh...done
>>>
>>> > Then everything freezes.
>>>
>>> > Any further ideas?
>>>
>>> > Thanks
>>>
>>> > Jannis
>>>
>>> > On 26.09.2014 19:26, Vitalie Spinu wrote:
>>> >> Then it's probably not ess related. Look into your *tramp/ssh XXX*
>>> >> buffer. Tramp is probably waiting for shell prompt.
>>> >>
>>> >> Vitalie
>>> >>
>>> >> You should see in *messages* something along the following lines:
>>> >>
>>> >> Tramp: Inserting `/ssh:vspinu2:/home/vspinu/.Rhistory'...
>>> >> Tramp: Encoding remote file `/ssh:vspinu2:/home/vspinu/.Rhistory' with
>>> `base64 <%s'...done
>>> >> Tramp: Decoding local file `/tmp/tramp.5255SVj' with
>>> `base64-decode-region'...done
>>> >> Tramp: Inserting `/ssh:vspinu2:/home/vspinu/.Rhistory'...done
>>> >> Tramp: Opening connection for vspinu2 using ssh...
>>> >> Tramp: Sending command `exec ssh -q -o ControlPersist=no -e
>>> none vspinu2'
>>> >> Tramp: Waiting for prompts from remote shell...done
>>> >> Tramp: Found remote shell prompt on `vspinu2'
>>> >> Tramp: Opening connection for vspinu2 using ssh...done
>>> >> ess-tracebug mode enabled
>>> >> Tramp: Encoding local file `/tmp/tramp.5255ffp' using
>>> `base64-encode-region'...done
>>> >> Tramp: Decoding remote file `/ssh:vspinu2:/home/vspinu/.Rhistory' using
>>> `base64 -d -i >%s'...done
>>> >>
>>> >>
>>> >> >>> Jannis on Fri, 26 Sep 2014 13:42:43 +0200 wrote:
>>> >>
>>> >> > Thanks for your reply. No Buffer is created. I only see some messages
>>> in the
>>> >> > "message buffer" on the bottom left and it freezes after the "opening
>>> connection
>>> >> > ..." message. C- g seems to stop process of starting R (i.e. the
>>> message
>>> >> > disappears and emacs is responsive again). This is not getting R
>>> started,
>>> >> > however. Is there any way (i.e. logs) to find out what causes this
>>> error?
>>> >>
>>> >> > Jannis
>>> >>
>>> >> > On 25.09.2014 19:31, Vitalie Spinu wrote:
>>> >> >> Does C-g help? Do you see an *R* buffer created?
>>> >> >>
>>> >> >> Vitalie
>>> >> >>
>>> >> >> >>> Jannis on Thu, 25 Sep 2014 17:17:08 +0200 wrote:
>>> >> >>
>>> >> >> > Dear ESS users,
>>> >> >>
>>> >> >> > after updating to ubuntu 14.04 I have problems to remotely run R on
>>> another
>>> >> >> > machine via ess and tramp. I start tramp via Ctr - x Ctr -f
>>> and then point emacs
>>> >> >> > to a file on the remote machine (.i.e
>>> >> >> > /machine_name/path_to_file/file_name.R). When I then hit Alt -x R
>>> (as I used to
>>> >> >> > do before the update), emacs hangs after the message
>>> >> >>
>>> >> >> > "Tramp: Opening connection for machine_name using ssh...done"
>>> >> >>
>>> >> >> > and is not responsive anymore. The exact same mechanism worked
>>> before. I can
>>> >> >> > also connect directly to the machine via ssa (i.e. via Alt -x ssh)
>>> without any
>>> >> >> > problems. Does anybody have an idea on how to narrow down on the
>>> cause of the
>>> >> >> > error?
>>> >> >>
>>> >> >> > Cheers
>>> >> >> > Jannis
>>> >> >>
>>> >> >> > This is my .emacs file:
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;; general and startup
>>> ;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;; Tell emacs where is your personal elisp lib dir
>>> >> >> > ;; this is the dir you place all your extra packages
>>> >> >> > (add-to-list 'load-path "~/.emacs.d/")
>>> >> >>
>>> >> >> > ;;disable startup messages
>>> >> >> > (setq inhibit-startup-message t)
>>> >> >>
>>> >> >> > ;; want two windows at startup
>>> >> >> > (split-window-horizontally)
>>> >> >>
>>> >> >> > ;;fullscreen mode
>>> >> >> > (defun toggle-fullscreen ()
>>> >> >> > (interactive)
>>> >> >> > (x-send-client-message nil 0 nil "_NET_WM_STATE" 32
>>> >> >> > '(2 "_NET_WM_STATE_MAXIMIZED_VERT" 0))
>>> >> >> > (x-send-client-message nil 0 nil "_NET_WM_STATE" 32
>>> >> >> > '(2 "_NET_WM_STATE_MAXIMIZED_HORZ" 0)))
>>> >> >> > (toggle-fullscreen)
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; misc tools
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;; show tabs
>>> >> >> > (require 'tabbar)
>>> >> >> > (tabbar-mode)
>>> >> >>
>>> >> >> > ;; ido stuff
>>> >> >> > (require 'ido)
>>> >> >> > (ido-mode t)
>>> >> >> > (setq ido-enable-flex-matching t)
>>> >> >> > (setq ido-create-new-buffer 'always)
>>> >> >>
>>> >> >> > ;; open recent files
>>> >> >> > (require 'recentf)
>>> >> >> > (setq recentf-auto-cleanup 'never) ;; disable before we start
>>> recentf!
>>> >> >> > (recentf-mode 1)
>>> >> >>
>>> >> >> > ;;regex tool
>>> >> >> > (load "regex-tool" t)
>>> >> >>
>>> >> >> > ;; bind recent files
>>> >> >> > (global-set-key "\C-x\C-r" 'recentf-open-files)
>>> >> >>
>>> >> >> > ;; clipboard
>>> >> >> > (setq x-select-enable-clipboard t)
>>> >> >>
>>> >> >> > ;; global
>>> >> >> > (require 'smartparens-config)
>>> >> >> > (require 'smartparens-latex)
>>> >> >> > (smartparens-global-mode t)
>>> >> >> > (add-hook 'post-command-hook 'sp--post-command-hook-handler)
>>> >> >>
>>> >> >> > ;; highlights matching pairs
>>> >> >> > (show-smartparens-global-mode t)
>>> >> >>
>>> >> >> > ;;(add-hook 'inferior-ess-mode-hook (lambda () (smartparens-mode
>>> 1)))
>>> >> >>
>>> >> >> > ;;(add-hook 'ess-R-post-run-hook 'smartparens-mode)
>>> >> >> > ;; (add-hook 'ess-post-run-hook 'smartparens-mode)
>>> >> >>
>>> >> >> > ;;(require 'smart-operator)
>>> >> >> > ;;(add-hook 'ess-mode-hook 'smart-operator-mode)
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > (require 'fixme-mode)
>>> >> >> > (require 'fic-mode)
>>> >> >> > ;(require 'fic-mode)
>>> >> >> > ;(add-hook 'ess-mode-hook 'turn-on-fic-mode)
>>> >> >> > ;(add-hook 'latex-mode-hook 'turn-on-fic-mode)
>>> >> >> > ;(add-hook 'LaTeX-mode-hook 'turn-on-fic-mode)
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;; autosave
>>> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > (require 'backup-each-save)
>>> >> >> > (add-hook 'after-save-hook 'backup-each-save)
>>> >> >>
>>> >> >> > ;; Put autosave files (ie #foo#) and backup files (ie foo~) in
>>> ~/.emacs.d/.
>>> >> >> > (custom-set-variables
>>> >> >> > ;; custom-set-variables was added by Custom.
>>> >> >> > ;; If you edit it by hand, you could mess it up, so be careful.
>>> >> >> > ;; Your init file should contain only one such instance.
>>> >> >> > ;; If there is more than one, they won't work right.
>>> >> >> > '(LaTeX-command "latex -synctex=1")
>>> >> >> > '(auto-save-file-name-transforms (quote ((".*"
>>> "~/.emacs.d/autosaves/\\1" t))))
>>> >> >> > '(backup-directory-alist (quote ((".*"
>>> . "~/.emacs.d/autosaves/"))))
>>> >> >> > '(comint-move-point-for-output (quote others))
>>> >> >> > '(csv-separators (quote ("" ",")))
>>> >> >> > '(delete-old-versions t)
>>> >> >> > '(kept-new-versions 100)
>>> >> >> > '(kept-old-versions 100)
>>> >> >> > '(make-directory "~/.emacs.d/autosaves/" t)
>>> >> >> > '(version-control t))
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ess stuff
>>> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;; r profile
>>> >> >> > (setenv "R_PROFILE_USER" "/home/my_name/.R/.RProfile")
>>> >> >>
>>> >> >> > ;; path of R program
>>> >> >> > (setq inferior-R-program-name "/usr/lib/R/bin/R")
>>> >> >>
>>> >> >> > ;; define startup options
>>> >> >> > (setq inferior-R-args "--no-save --no-restore --silent")
>>> >> >>
>>> >> >> > ;; ess stuff
>>> >> >> > (require 'ess-site)
>>> >> >>
>>> >> >> > ;; turn off echoing of commands
>>> >> >> > (setq ess-eval-visibly-p nil)
>>> >> >>
>>> >> >> > ;; save history to one specific file
>>> >> >> > (setq ess-history-directory "~/.R/")
>>> >> >>
>>> >> >> > ;; Enable function argument hint for ESS
>>> >> >> > (require 'ess-eldoc)
>>> >> >>
>>> >> >> > ;;start tracebug
>>> >> >> > (require 'ess-tracebug)
>>> >> >> > (add-hook 'ess-post-run-hook 'ess-tracebug t)
>>> >> >>
>>> >> >> > (ess-toggle-underscore nil)
>>> >> >> > (server-start)
>>> >> >>
>>> >> >> > ;; Code folding in ess mode
>>> >> >> > (add-hook 'ess-mode-hook
>>> >> >> > (lambda()
>>> >> >> > (local-set-key (kbd "C-c <right>") 'hs-show-block)
>>> >> >> > (local-set-key (kbd "C-c <left>") 'hs-hide-block)
>>> >> >> > (local-set-key (kbd "C-c <up>") 'hs-hide-all)
>>> >> >> > (local-set-key (kbd "C-c <down>") 'hs-show-all)
>>> >> >> > (hs-minor-mode t)))
>>> >> >>
>>> >> >> > (autoload 'ess-rdired "ess-rdired"
>>> >> >> > "View *R* objects in a dired-like buffer." t)
>>> >> >>
>>> >> >> > ;;speed up emacs by removing echoing
>>> >> >> > (setq ess-eval-visibly-p nil)
>>> >> >>
>>> >> >> > (define-key comint-mode-map [C-up]
>>> 'comint-previous-matching-input-from-input)
>>> >> >> > (define-key comint-mode-map [C-down]
>>> 'comint-next-matching-input-from-input)
>>> >> >>
>>> >> >> > ;;'(ess-auto-newline t)
>>> >> >>
>>> >> >> > (add-hook 'inferior-ess-mode-hook
>>> >> >> > (lambda()
>>> >> >> > ; ess-S-mouse-me-menu-commands
>>> >> >> > ; turn-on-font-lock
>>> >> >> > (smartparens-mode 1)))
>>> >> >>
>>> >> >> > ; no wuatsion for startup directory
>>> >> >> > (setq ess-ask-for-ess-directory nil)
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ssh stuff
>>> ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;;set up ssh tunelling
>>> >> >> > (load "~/.emacs.d/ssh.el")
>>> >> >> > (setq ssh-program "ssh")
>>> >> >>
>>> >> >> > ;; turn off shell command echo
>>> >> >> > (defun my-comint-init ()
>>> >> >> > (setq comint-process-echoes t))
>>> >> >> > (add-hook 'comint-mode-hook 'my-comint-init)
>>> >> >>
>>> >> >> > ;; allow interaction with screen
>>> >> >> > ;; used to send screen keybindings to shell in emacs
>>> >> >> > (define-key shell-mode-map (kbd "C-l") (lambda (seq) (interactive
>>> "k")
>>> >> >> > (process-send-string nil seq)))
>>> >> >> > (define-key inferior-ess-mode-map (kbd "C-l") (lambda (seq)
>>> (interactive "k")
>>> >> >> > (process-send-string nil seq)))
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Tex stuff
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > (setq TeX-auto-save t)
>>> >> >> > (setq TeX-parse-self t)
>>> >> >> > (setq TeX-save-query nil)
>>> >> >> > (setq TeX-PDF-mode t)
>>> >> >> > (setq-default TeX-master nil)
>>> >> >>
>>> >> >> > ;; (setq TeX-view-program-list '(("Okular" "okular --unique %u")))
>>> >> >>
>>> >> >> > ;; (add-hook 'LaTeX-mode-hook '(lambda ()
>>> >> >> > ;; (add-to-list 'TeX-expand-list
>>> >> >> > ;; '("%u" Okular-make-url))))
>>> >> >>
>>> >> >> > ;; (defun Okular-make-url () (concat
>>> >> >> > ;; "file://"
>>> >> >> > ;; (expand-file-name (funcall file
>>> (TeX-output-extension) t)
>>> >> >> > ;; (file-name-directory (TeX-master-file)))
>>> >> >> > ;; "#src:"
>>> >> >> > ;; (TeX-current-line)
>>> >> >> > ;; (expand-file-name (TeX-master-directory))
>>> >> >> > ;; "./"
>>> >> >> > ;; (TeX-current-file-name-master-relative)))
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >> > ;; Enable synctex correlation
>>> >> >> > (setq TeX-source-correlate-method 'synctex)
>>> >> >> > ;; Enable synctex generation. Even though the command shows
>>> >> >> > ;; as "latex" pdflatex is actually called
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >> > ;; Use Okular as the pdf viewer. Build okular
>>> >> >> > ;; command, so that Okular jumps to the current line
>>> >> >> > ;; in the viewer.
>>> >> >> > (setq TeX-view-program-selection
>>> >> >> > '((output-pdf "PDF Viewer")))
>>> >> >> > (setq TeX-view-program-list
>>> >> >> > '(("PDF Viewer" "okular --unique %o#src:%n%b")))
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > (load "preview-latex.el" nil t t)
>>> >> >>
>>> >> >> > (setq ispell-program-name "aspell") ; could be ispell as well,
>>> depending on your
>>> >> >> > preferences
>>> >> >> > (setq ispell-dictionary "english") ; this can obviously be set to
>>> any language
>>> >> >> > your spell-checking program supports
>>> >> >>
>>> >> >> > (dolist (hook '(lisp-mode-hook
>>> >> >> > emacs-lisp-mode-hook
>>> >> >> > shell-mode-hook
>>> >> >> > ess-mode-hook))
>>> >> >> > (add-hook hook 'flyspell-prog-mode))
>>> >> >>
>>> >> >> > (require 'tex-site)
>>> >> >> > (autoload 'reftex-mode "reftex" "RefTeX Minor Mode" t)
>>> >> >> > (autoload 'turn-on-reftex "reftex" "RefTeX Minor Mode" nil)
>>> >> >> > (autoload 'reftex-citation "reftex-cite" "Make citation" nil)
>>> >> >> > (autoload 'reftex-index-phrase-mode "reftex-index" "Phrase Mode" t)
>>> >> >> > ;(add-hook 'latex-mode-hook 'turn-on-reftex) ; with Emacs latex
>>> mode
>>> >> >> > ;(add-hook 'plain-tex-mode-hook 'turn-on-reftex) ; with Emacs latex
>>> mode
>>> >> >>
>>> >> >> > ;; (add-hook 'reftex-load-hook 'imenu-add-menubar-index)
>>> >> >> > (add-hook 'LaTeX-mode-hook 'turn-on-reftex)
>>> >> >>
>>> >> >> > (add-hook 'LaTeX-mode-hook 'turn-on-auto-fill)
>>> >> >> > ;(add-hook 'latex-mode-hook 'turn-on-auto-fill)
>>> >> >> > (add-hook 'text-mode-hook 'turn-on-auto-fill)
>>> >> >> > (setq-default fill-column 80)
>>> >> >>
>>> >> >> > (dolist (hook '(LaTeX-mode-hook))
>>> >> >> > (add-hook hook (lambda () (flyspell-mode 1))))
>>> >> >> > ;(dolist (hook '(latex-mode-hook))
>>> >> >> > ; (add-hook hook (lambda () (flyspell-mode 1))))
>>> >> >>
>>> >> >> > (setq TeX-parse-self t) ; Enable parse on load.
>>> >> >> > (setq TeX-auto-save t) ; Enable parse on save.
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; layout stuff
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;; show changes since last save
>>> >> >> > (global-highlight-changes-mode t)
>>> >> >> > (global-set-key (kbd "<M-down>") 'highlight-changes-next-change)
>>> >> >> > (global-set-key (kbd "<M-up>") 'highlight-changes-previous-change)
>>> >> >> > (set-face-foreground 'highlight-changes nil)
>>> >> >> > (set-face-background 'highlight-changes "#6495ed")
>>> >> >> > (set-face-foreground 'highlight-changes-delete nil)
>>> >> >> > (set-face-background 'highlight-changes-delete "#ff8c00")
>>> >> >> > (global-set-key (kbd "<f6>") 'highlight-changes-visible-mode) ;;
>>> changes
>>> >> >> > (add-hook 'text-mode-hook
>>> >> >> > (defun highlight-changes-remove-after-save ()
>>> >> >> > "Remove previous changes after save."
>>> >> >> > (make-local-variable 'after-save-hook)
>>> >> >> > (add-hook 'after-save-hook
>>> >> >> > (lambda ()
>>> >> >> > (highlight-changes-remove-highlight (point-min) (point-max))))))
>>> >> >>
>>> >> >> > (add-hook 'ess-mode-hook
>>> >> >> > (defun highlight-changes-remove-after-save ()
>>> >> >> > "Remove previous changes after save."
>>> >> >> > (make-local-variable 'after-save-hook)
>>> >> >> > (add-hook 'after-save-hook
>>> >> >> > (lambda ()
>>> >> >> > (highlight-changes-remove-highlight (point-min) (point-max))))))
>>> >> >>
>>> >> >> > ;; In every buffer, the line which contains the cursor will be
>>> fully
>>> >> >> > ;; highlighted
>>> >> >> > (global-hl-line-mode 1)
>>> >> >>
>>> >> >> > ;; ;; autocomplete stuff
>>> >> >> > ;; (add-to-list 'load-path "~/.emacs.d/autocomplete/")
>>> >> >> > ;; (require 'auto-complete-config)
>>> >> >> > ;; (add-to-list 'ac-dictionary-directories
>>> "~/.emacs.d/autocomplete//ac-dict")
>>> >> >> > ;; (ac-config-default)
>>> >> >> > ;; (define-key ac-completing-map "\r" nil)
>>> >> >> > ;; (setq
>>> >> >> > ;; ;; ac-auto-show-menu 1
>>> >> >> > ;; ;; ac-candidate-limit nil
>>> >> >> > ;; ;; ac-delay 0.1
>>> >> >> > ;; ;; ac-disable-fafluxes_clean[ siteT, 'NEE_f', idx_extreme]ces
>>> (quote (font-lock-comment-face font-lock-doc-face))
>>> >> >> > ;; ac-ignore-case 'smart
>>> >> >> > ;; ;;ac-menu-height 20
>>> >> >> > ;; ac-quick-help-delay 3
>>> >> >> > ;; ;; ac-quick-help-prefer-pos-tip t
>>> >> >> > ;; ;; ac-use-quick-help nil
>>> >> >> > ;; ac-fuzzy-enable t
>>> >> >> > ;; )
>>> >> >> > (add-to-list 'load-path "~/.emacs.d/")
>>> >> >> > (require 'auto-complete-config)
>>> >> >> > (add-to-list 'ac-dictionary-directories "~/.emacs.d//ac-dict")
>>> >> >> > (ac-config-default)
>>> >> >>
>>> >> >> > ;; align equal signs
>>> >> >> > ;; Align with spaces only
>>> >> >> > (defadvice align-regexp (around align-regexp-with-spaces)
>>> >> >> > "Never use tabs for alignment."
>>> >> >> > (let ((indent-tabs-mode nil))
>>> >> >> > ad-do-it))
>>> >> >> > (ad-activate 'align-regexp)
>>> >> >>
>>> >> >> > ;; activate parenthesis matching
>>> >> >> > (show-paren-mode t)
>>> >> >>
>>> >> >> > ;; no line wrap
>>> >> >> > (setq default-truncate-lines t)
>>> >> >>
>>> >> >> > (require 'fill-column-indicator)
>>> >> >> > (add-hook 'ess-mode-hook 'fci-mode)
>>> >> >>
>>> >> >> > ;;highlight FIXMES
>>> >> >>
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >> > (add-hook 'text-mode-hook
>>> >> >> > (lambda()
>>> >> >> > (font-lock-add-keywords nil
>>> >> >> > '(("\\<\\(FIXME\\|TODO\\|XXX+\\|BUG\\):"
>>> >> >> > 1 font-lock-warning-face prepend)))))
>>> >> >>
>>> >> >> > (add-hook 'ess-mode-hook
>>> >> >> > (lambda()
>>> >> >> > (font-lock-add-keywords nil
>>> >> >> > '(("\\<\\(FIXME\\|TODO\\|XXX+\\|BUG\\):"
>>> >> >> > 1 font-lock-warning-face prepend)))))
>>> >> >>
>>> >> >> > (add-hook 'LaTeX-mode-hook
>>> >> >> > (lambda ()
>>> >> >> > (font-lock-add-keywords nil
>>> >> >> > '(("\\<\\(FIXME\\|TODO\\|BUG\\):" 1 font-lock-warning-face
>>> >> >> > t)))))
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; behaviur
>>> >> >> > ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
>>> >> >>
>>> >> >> > ;; ===== Set standard indent to 2 rather that 4 ====
>>> >> >> > (setq standard-indent 2)
>>> >> >>
>>> >> >> > ;; scroll only one line
>>> >> >> > (setq scroll-step 1)
>>> >> >>
>>> >> >> > ;; ========== Support Wheel Mouse Scrolling ==========
>>> >> >> > (mouse-wheel-mode t)
>>> >> >>
>>> >> >> > (global-set-key (kbd "C-l") 'highlight-regexp)
>>> >> >>
>>> >> >> > (defun sort-words (reverse beg end))
>>> >> >>
>>> >> >> > (global-set-key "\C-x\C-b" 'buffer-menu)
>>> >> >>
>>> >> >> > (setq tramp-default-method "ssh")
>>> >> >> > ;(getenv "R_PROFILE_USER")
>>> >> >>
>>> >> >> > (custom-set-faces
>>> >> >> > ;; cusTramp: Waiting for prompts from remote shell
>>> >> Tramp: Sending command `exec ssh -q -e none PC028'
>>> >> Tramp: Found remote shell prompt on `PC028'
>>> >> Tramp: Opening connection for PC028 using ssh...donetom-set-faces was
>>> added by Custom.
>>> >> >> > ;; If you edit it by hand, you could mess it up, so be careful.
>>> >> >> > ;; Your init file should contain only one such instance.
>>> >> >> > ;; If there is more than one, they won't work right.
>>> >> >> > )
>>> >> >>
>>> >> >> > ______________________________________________
>>> >> >> > ESS-help at r-project.org mailing list
>>> >> >> > https://stat.ethz.ch/mailman/listinfo/ess-help>>>> >>
>>>
>>>
>>
>> ______________________________________________
>> ESS-help at r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/ess-help>
More information about the ESS-help
mailing list