[BioC] GenomicRanges::nearest (especially follow)
Harris A. Jaffee
hj at jhu.edu
Tue Oct 16 21:21:54 CEST 2012
Any rule is fine with me. They would not occur for us except by mistake.
I was basically raising an alert that the current situation is not quite
complete.
On Oct 16, 2012, at 2:53 PM, Michael Lawrence wrote:
> Since these zero-width ranges do have a position, I'm not sure why we cannot calculate their distance. As long as we have an established rule about how we handle them. For example, is it just from the start? That's probably most intuitive.
>
> Michael
>
> On Tue, Oct 16, 2012 at 11:25 AM, Valerie Obenchain <vobencha at fhcrc.org> wrote:
> On 10/16/2012 09:25 AM, Harris A. Jaffee wrote:
> Fantastic, thank you. I'm not sure I knew about that page!
>
> For example, ?precede gives me the IRanges nearest-methods page,
> and only if I explicitly request ?'nearest-methods' can I choose
> the GenomicRanges page. That brings up another issue: ?distance
> again sends me to the IRanges nearest-methods help, and that only
> documents distanceToNearest, which is not enough. The spec for
> distance actually lives only on
> ?'precede,GenomicRanges,GenomicRanges-method', as far as I see.
>
> I can update the IRanges man page to include distance().
>
> Finally, and admittedly a total edge case, but zero-width ranges
> appear to be mishandled, or not handled, by the IRanges distance
> code. I think they should be infinitely far from anything, or at
> least NA, and there should not be any nearest or distanceToNearest
> value for a zero-width query.
> cc'ing Herve and Michael for history.
>
> In general I agree that zero-width ranges should not have a distance from any other range. I favor returning NA instead of inf since the range (albeit zero-width) does have a location.
>
> One concern I have is that we use zero-width ranges to represent insertions. In that context we may want to compute the distance to the nearest insertion. I do not have a concrete use case - just thinking of what might come. I'd be interested in opinions on this.
>
> Valerie
>
>
>
> x
> IRanges of length 1
> start end width
> [1] 2 1 0
>
> distance(x, x)
> [1] 1
>
> y
> IRanges of length 1
> start end width
> [1] 3 2 0
>
> distance(x, y)
> [1] 2
>
> z
> IRanges of length 1
> start end width
> [1] 3 3 1
>
> distance(x, z)
> [1] 2
>
> On Oct 15, 2012, at 6:27 PM, Valerie Obenchain wrote:
>
> A few follow up items from an off-list conversation with Harris.
>
> 1) I reversed the use of 5' and3' in my response below. Sorry about that.
>
> 2) The primary landing page for ?precede is in IRanges. I've expanded the \seealso section of this page to point the user to the man page in GenomicRanges.
>
> 3) The precede/follow man page in GenomicRanges now specifically states that 5' to 3' is the relevant orientation for precede/follow. For those interested in taking a look, the man page has several aliases,
>
> ?'nearest-methods'
> ?'precede,GenomicRanges,GenomicRanges-method'
> ?'follow,GenomicRanges,GenomicRanges-method'
>
> Changes can be found in IRanges 1.17.3 and GenomicRanges 1.11.4.
>
> Thanks Harris.
>
> Valerie
>
> On 10/12/2012 04:17 PM, Valerie Obenchain wrote:
> Hi Harris,
>
> On 10/11/2012 02:27 PM, Harris A. Jaffee wrote:
> Apologies in advance if I just don't understand the ignore.strand switch, or
> perhaps GRanges objects. Also, I have not even tried to understand
>
> GenomicRanges:::.GenomicRanges_findPrecedeFollow
>
> I have the impression that a query with strand entirely "*" essentially implies
> ignore.strand, but this case here is handled correctly only if ignore.strand is
> TRUE (consistent with distanceToNearest but not distance, which seems correct):
>
> x = GRanges(ranges=IRanges(start=5, end=5), seqnames="chr1", strand="*")
> Y = GRanges(ranges=IRanges(start=c(6,7), end=c(6,7)), seqnames="chr1", strand=c("+","-"))
> distance(x, Y[1])
> [1] 1
> distance(x, Y[2])
> [1] 2
>
> nearest(x, Y, ignore.strand=TRUE) # correct
> [1] 1
> nearest(ranges(x), ranges(Y)) # also correct
> [1] 1
>
> However,
>
> nearest(x, Y)
> [1] 2
> Thanks for reporting this bug. Now fixed in GenomicRanges 1.11.3 and 1.10.2.
>
> The problem was in .nearest() where I computed the preceding and following distance of the ranges. I was missing abs() so the distance for the second range was -2 instead of 2. When checking to see which range was closest
>
> 1< -2
> [1] FALSE
>
> so the second range won.
> distanceToNearest(x, Y)
> DataFrame with 1 row and 3 columns
> queryHits subjectHits distance
> <integer> <integer> <integer>
> 1 1 2 2
>
> distanceToNearest(x, Y, ignore.strand=TRUE)
> DataFrame with 1 row and 3 columns
> queryHits subjectHits distance
> <integer> <integer> <integer>
> 1 1 1 1
>
>
> Finally,
>
> follow(ranges(x), ranges(Y))
> [1] NA
>
> The issue (along with GenomicRanges:::.nearest) must come down to this:
>
> follow(x, Y) # how can this be?
> [1] 2
> This behavior is due to the fact that a '*' range can compare itself to either '+' or '-'. The 'x' is '*" located at position 5. When comparing it to the '+' Y[1]
> we think of both ranges as '+'. precede() and follow() locations are determined by moving from 3' to 5'. On '+' strand this is from left to right so 5 precedes 6.
>
> precede(x, Y[1])
> [1] 1
>
> but does not follow it
>
> follow(x, Y[1])
> [1] NA
>
> When comparing the '*' to Y[2] we think of both ranges as '-'. On the '-' moving from 3' to 5' is right to left so the 5 follows 7
>
> follow(x, Y[2])
> [1] 1
>
> but does not precede it
>
> precede(x, Y[2])
> [1] NA
>
> When we set ignore.strand=TRUE, all ranges are considered '+'.
>
> Valerie
> whereas
>
> follow(x, Y, ignore.strand=TRUE) # correct, I think
> [1] NA
>
> sessionInfo()
> R Under development (unstable) (2012-10-10 r60908)
> Platform: x86_64-unknown-linux-gnu (64-bit)
>
> locale:
> [1] LC_CTYPE=en_US.iso885915 LC_NUMERIC=C
> [3] LC_TIME=en_US.iso885915 LC_COLLATE=en_US.iso885915
> [5] LC_MONETARY=en_US.iso885915 LC_MESSAGES=en_US.iso885915
> [7] LC_PAPER=C LC_NAME=C
> [9] LC_ADDRESS=C LC_TELEPHONE=C
> [11] LC_MEASUREMENT=en_US.iso885915 LC_IDENTIFICATION=C
>
> attached base packages:
> [1] stats graphics grDevices datasets utils methods base
>
> other attached packages:
> [1] GenomicRanges_1.11.0 IRanges_1.17.0 BiocGenerics_0.5.0
>
> loaded via a namespace (and not attached):
> [1] parallel_2.16.0 stats4_2.16.0 tools_2.16.0
>
> _______________________________________________
> Bioconductor mailing list
> Bioconductor at r-project.org
> https://stat.ethz.ch/mailman/listinfo/bioconductor
> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor
> _______________________________________________
> Bioconductor mailing list
> Bioconductor at r-project.org
> https://stat.ethz.ch/mailman/listinfo/bioconductor
> Search the archives: http://news.gmane.org/gmane.science.biology.informatics.conductor
>
>
More information about the Bioconductor
mailing list