[Bioc-devel] summarizeOverlaps example error
Valerie Obenchain
vobencha at fhcrc.org
Wed Aug 8 04:06:08 CEST 2012
Hi Mark,
Try GenomicRanges 1.9.42 which requires IRanges 1.15.29. The example ran
successfully for me with this combination. There was a problem was with
newCompressedList() in IRanges which was fixed in r68298.
Valerie
svn log for IRanges :
------------------------------------------------------------------------
r68298 | hpages at fhcrc.org | 2012-08-07 18:43:15 -0700 (Tue, 07 Aug 2012)
| 3 lines
Small tweak to newCompressedList0() internal constructor so it produces
valid
GRangesList objects.
On 08/06/12 21:56, Mark Robinson wrote:
> For what its worth, a colleague checked it out on a couple different systems (Thanks Keith!) and … I don't think my original using R-devel instead of R-2.15.1 is really the issue.
>
> This works … no error.
>
>> sessionInfo()
> R Under development (unstable) (2012-06-11 r59557)
> Platform: x86_64-unknown-linux-gnu (64-bit)
>
> locale:
> [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
> [3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
> [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
> [7] LC_PAPER=C LC_NAME=C
> [9] LC_ADDRESS=C LC_TELEPHONE=C
> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
>
> attached base packages:
> [1] stats graphics grDevices utils datasets methods base
>
> other attached packages:
> [1] TxDb.Dmelanogaster.UCSC.dm3.ensGene_2.7.1
> [2] GenomicFeatures_1.9.11
> [3] AnnotationDbi_1.19.16
> [4] BiocInstaller_1.5.12
> [5] edgeR_2.7.25
> [6] limma_3.13.8
> [7] DESeq_1.9.7
> [8] locfit_1.5-8
> [9] Biobase_2.17.6
> [10] Rsamtools_1.9.18
> [11] Biostrings_2.25.6
> [12] GenomicRanges_1.9.28
> [13] IRanges_1.15.17
> [14] BiocGenerics_0.3.0
>
> loaded via a namespace (and not attached):
> [1] annotate_1.35.3 biomaRt_2.13.1 bitops_1.0-4.1
> [4] BSgenome_1.25.3 DBI_0.2-5 genefilter_1.39.0
> [7] geneplotter_1.35.0 grid_2.16.0 lattice_0.20-6
> [10] RColorBrewer_1.0-5 RCurl_1.91-1 RSQLite_0.11.1
> [13] rtracklayer_1.17.11 splines_2.16.0 stats4_2.16.0
> [16] survival_2.36-14 tools_2.16.0 XML_3.9-4
> [19] xtable_1.7-0 zlibbioc_1.3.0
>
> This throws the same error as mine …
>
>
>> sessionInfo()
> R Under development (unstable) (2012-05-08 r59331)
> Platform: x86_64-pc-mingw32/x64 (64-bit)
>
> locale:
> [1] LC_COLLATE=English_Australia.1252 LC_CTYPE=English_Australia.1252
> [3] LC_MONETARY=English_Australia.1252 LC_NUMERIC=C
> [5] LC_TIME=English_Australia.1252
>
> attached base packages:
> [1] stats graphics grDevices utils datasets methods base
>
> other attached packages:
> [1] TxDb.Dmelanogaster.UCSC.dm3.ensGene_2.7.1
> [2] GenomicFeatures_1.9.28
> [3] AnnotationDbi_1.19.28
> [4] edgeR_2.99.4
> [5] limma_3.13.16
> [6] DESeq_1.9.11
> [7] lattice_0.20-6
> [8] locfit_1.5-8
> [9] Biobase_2.17.6
> [10] Rsamtools_1.9.25
> [11] Biostrings_2.25.8
> [12] GenomicRanges_1.9.41
> [13] IRanges_1.15.25
> [14] BiocGenerics_0.3.0
> [15] BiocInstaller_1.5.12
>
> loaded via a namespace (and not attached):
> [1] annotate_1.35.3 biomaRt_2.13.2 bitops_1.0-4.1
> [4] BSgenome_1.25.6 DBI_0.2-5 genefilter_1.39.0
> [7] geneplotter_1.35.1 grid_2.16.0 RColorBrewer_1.0-5
> [10] RCurl_1.91-1.1 RSQLite_0.11.1 rtracklayer_1.17.15
> [13] splines_2.16.0 stats4_2.16.0 survival_2.36-14
> [16] tools_2.16.0 XML_3.9-4.1 xtable_1.7-0
> [19] zlibbioc_1.3.0
> So, something has happened between GenomicRanges_1.9.28 and GenomicRanges_1.9.41 (plus a multitude other changes).
>
> Best,
> Mark
>
> On 06.08.2012, at 22:11, Dan Tenenbaum wrote:
>
>> Hi Mark,
>>
>> On Mon, Aug 6, 2012 at 1:01 PM, Mark Robinson<mark.robinson at imls.uzh.ch> wrote:
>>> Hi all,
>>>
>>> My apologies in advance if I've done something pin-headed here, but can anyone else produce an error just by doing:
>>>
>>> library(GenomicRanges)
>>> example(summarizeOverlaps)
>>>
>>> I think I have a set of updated (devel) packages:
>>>
>>>> source("http://bioconductor.org/biocLite.R")
>>> BiocInstaller version 1.5.12, ?biocLite for help
>>>> old.packages(repos=biocinstallRepos())
>>> NULL
>>>
>>> My R devel is a bit old (2012-06-14 r59564) … maybe I should upgrade?
>>>
>> The devel version of Bioconductor (2.11) is not intended for use with
>> R-devel. It's meant to be used with R 2.15 (just as Bioconductor 2.10,
>> the release version, is). It's a bit confusing. It's because R moved
>> to a yearly release schedule but we are keeping our twice-yearly
>> release schedule.
>>
>> I don't know if that is the cause of your problems, but Bioconductor
>> packages are not tested or built on R-devel, so who knows what could
>> happen. Unless there is some feature in R-devel that you really want,
>> I'd suggest trying R 2.15 and see if that fixes things.
>>
>> More info here:
>> http://bioconductor.org/developers/useDevel/
>>
>> Dan
>>
>>
>>> Error, traceback() and sessionInfo() below …
>>>
>>> Help much appreciated.
>>>
>>> Best,
>>> Mark
>>>
>>>
>>>> example(summarizeOverlaps)
>>> smmrzO> reads<- GappedAlignments(
>>> smmrzO+ names = c("a","b","c","d","e","f","g"),
>>> smmrzO+ seqnames = Rle(c(rep(c("chr1", "chr2"), 3), "chr1")),
>>> smmrzO+ pos = as.integer(c(1400, 2700, 3400, 7100, 4000, 3100, 5200)),
>>> smmrzO+ cigar = c("500M", "100M", "300M", "500M", "300M",
>>> smmrzO+ "50M200N50M", "50M150N50M"),
>>> smmrzO+ strand = strand(rep("+", 7)))
>>>
>>> smmrzO> ## ---------------------------------------------------------------------
>>> smmrzO> ## 'features' as GRanges
>>> smmrzO> ##
>>> smmrzO>
>>> smmrzO> features<- GRanges(
>>> smmrzO+ seqnames = c(rep("chr1", 7), rep("chr2", 4)), strand = "+",
>>> smmrzO+ ranges = IRanges(c(1000, 3000, 3600, 4000, 4000, 5000, 5400, 2000,
>>> smmrzO+ 3000, 7000, 7500), width = c(500, 500, 300, 500, 900, 500, 500,
>>> smmrzO+ 900, 500, 600, 300)),
>>> smmrzO+ group_id = c("A", "B", "C", "C", "D", "D", "E", "F", "G", "H", "H"))
>>>
>>> smmrzO> ## Each row is a feature the read can 'hit'.
>>> smmrzO> rowsAsFeatures<- data.frame(
>>> smmrzO+ union = assays(summarizeOverlaps(features, reads))$counts,
>>> smmrzO+ intStrict = assays(summarizeOverlaps(features, reads,
>>> smmrzO+ mode="IntersectionStrict"))$counts,
>>> smmrzO+ intNotEmpty = assays(summarizeOverlaps(features, reads,
>>> smmrzO+ mode="IntersectionNotEmpty"))$counts,
>>> smmrzO+ countOverlaps = countOverlaps(features, reads))
>>>
>>> smmrzO> ## Results from countOverlaps() are included to highlight how
>>> smmrzO> ## summarizeOverlaps() counts a read only once. For these 7
>>> smmrzO> ## reads, 'Union' is the most conservative counting mode, followed
>>> smmrzO> ## by 'Intersectionstrict' and then 'IntersectionNotEmpty'.
>>> smmrzO>
>>> smmrzO> colSums(rowsAsFeatures)
>>> union intStrict intNotEmpty countOverlaps
>>> 3 4 5 11
>>>
>>> smmrzO> ## ---------------------------------------------------------------------
>>> smmrzO> ## 'features' as GRangesList
>>> smmrzO> ##
>>> smmrzO>
>>> smmrzO> ## Each highest list-level is a feature the read can 'hit'.
>>> smmrzO> lst<- split(features, values(features)[["group_id"]])
>>>
>>> smmrzO> listAsFeatures<- data.frame(
>>> smmrzO+ union = assays(summarizeOverlaps(lst, reads))$counts,
>>> smmrzO+ intStrict = assays(summarizeOverlaps(lst, reads,
>>> smmrzO+ mode="IntersectionStrict"))$counts,
>>> smmrzO+ intNotEmpty = assays(summarizeOverlaps(lst, reads,
>>> smmrzO+ mode="IntersectionNotEmpty"))$counts,
>>> smmrzO+ countOverlaps = countOverlaps(lst, reads))
>>>
>>> smmrzO> ## ---------------------------------------------------------------------
>>> smmrzO> ## 'reads' as BamFileList
>>> smmrzO> ##
>>> smmrzO>
>>> smmrzO> ## Count BAM files and prepare output for DESeq or edgeR analysis
>>> smmrzO> library(Rsamtools)
>>>
>>> smmrzO> library(DESeq)
>>>
>>> smmrzO> library(edgeR)
>>>
>>> smmrzO> fls<- list.files(system.file("extdata",package="GenomicRanges"),
>>> smmrzO+ recursive=TRUE, pattern="*bam$", full=TRUE)
>>>
>>> smmrzO> names(fls)<- basename(fls)
>>>
>>> smmrzO> bfl<- BamFileList(fls, index=character())
>>>
>>> smmrzO> features<- GRanges(
>>> smmrzO+ seqnames = c(rep("chr2L", 4), rep("chr2R", 5), rep("chr3L", 2)),
>>> smmrzO+ ranges = IRanges(c(1000, 3000, 4000, 7000, 2000, 3000, 3600, 4000,
>>> smmrzO+ 7500, 5000, 5400), width=c(rep(500, 3), 600, 900, 500, 300, 900,
>>> smmrzO+ 300, 500, 500)), "-",
>>> smmrzO+ group_id=c(rep("A", 4), rep("B", 5), rep("C", 2)))
>>>
>>> smmrzO> solap<- summarizeOverlaps(features, bfl)
>>>
>>> smmrzO> deseq<- newCountDataSet(assays(solap)$counts, rownames(colData(solap)))
>>>
>>> smmrzO> edger<- DGEList(assays(solap)$counts, group=rownames(colData(solap)))
>>> Calculating library sizes from column totals.
>>>
>>> smmrzO> ## ---------------------------------------------------------------------
>>> smmrzO> ## paired-end reads
>>> smmrzO> ##
>>> smmrzO>
>>> smmrzO> library("TxDb.Dmelanogaster.UCSC.dm3.ensGene")
>>>
>>> smmrzO> exbygene<- exonsBy(TxDb.Dmelanogaster.UCSC.dm3.ensGene, "gene")
>>>
>>> smmrzO> fl<- system.file("extdata", "untreated3_chr4.bam",
>>> smmrzO+ package="pasillaBamSubset")
>>>
>>> smmrzO> ## Paired-end reads are stored in a GappedAlignmentPairs object
>>> smmrzO> reads<- readGappedAlignmentPairs(fl)
>>>
>>> smmrzO> res<- summarizeOverlaps(exbygene, reads, "Union")
>>> Warning messages:
>>> 1: In is.na(unique(f)) :
>>> is.na() applied to non-(list or vector) of type 'S4'
>>> 2: In IRanges:::newCompressedList("GRangesList", x, splitFactor = f, :
>>> data length is not a multiple of split variable
>>> Error in countOverlaps(reads, features, ignore.strand = ignore.strand) :
>>> error in evaluating the argument 'query' in selecting a method for function 'countOverlaps': Error in unique.default(x) : unique() applies only to vectors
>>>> traceback()
>>> 10: countOverlaps(reads, features, ignore.strand = ignore.strand)
>>> 9: mode(reads, features, ignore.strand)
>>> 8: .dispatchOverlaps(grglist(reads), features, mode, ignore.strand)
>>> 7: summarizeOverlaps(exbygene, reads, "Union")
>>> 6: summarizeOverlaps(exbygene, reads, "Union") at Rex84b25fb6afa1#102
>>> 5: eval(expr, envir, enclos)
>>> 4: eval(ei, envir)
>>> 3: withVisible(eval(ei, envir))
>>> 2: source(tf, local, echo = echo, prompt.echo = paste0(prompt.prefix,
>>> getOption("prompt")), continue.echo = paste0(prompt.prefix,
>>> getOption("continue")), verbose = verbose, max.deparse.length = Inf,
>>> encoding = "UTF-8", skip.echo = skips, keep.source = TRUE)
>>> 1: example(summarizeOverlaps)
>>>
>>>
>>>> sessionInfo()
>>> R Under development (unstable) (2012-06-14 r59564)
>>> Platform: x86_64-unknown-linux-gnu (64-bit)
>>>
>>> locale:
>>> [1] en_CA.UTF-8
>>>
>>> attached base packages:
>>> [1] stats graphics grDevices utils datasets methods base
>>>
>>> other attached packages:
>>> [1] BiocInstaller_1.5.12
>>> [2] TxDb.Dmelanogaster.UCSC.dm3.ensGene_2.7.1
>>> [3] GenomicFeatures_1.9.28
>>> [4] AnnotationDbi_1.19.28
>>> [5] edgeR_2.99.4
>>> [6] limma_3.13.16
>>> [7] DESeq_1.9.11
>>> [8] lattice_0.20-6
>>> [9] locfit_1.5-8
>>> [10] Biobase_2.17.6
>>> [11] Rsamtools_1.9.25
>>> [12] Biostrings_2.25.8
>>> [13] GenomicRanges_1.9.41
>>> [14] IRanges_1.15.25
>>> [15] BiocGenerics_0.3.0
>>>
>>> loaded via a namespace (and not attached):
>>> [1] annotate_1.35.3 biomaRt_2.13.2 bitops_1.0-4.1
>>> [4] BSgenome_1.25.6 DBI_0.2-5 genefilter_1.39.0
>>> [7] geneplotter_1.35.1 grid_2.16.0 RColorBrewer_1.0-5
>>> [10] RCurl_1.91-1 RSQLite_0.11.1 rtracklayer_1.17.15
>>> [13] splines_2.16.0 stats4_2.16.0 survival_2.36-14
>>> [16] tools_2.16.0 XML_3.9-4 xtable_1.7-0
>>> [19] zlibbioc_1.3.0
>>>
>>>
>>>
>>>
>>> ----------
>>> Prof. Dr. Mark Robinson
>>> Bioinformatics
>>> Institute of Molecular Life Sciences
>>> University of Zurich
>>> Winterthurerstrasse 190
>>> 8057 Zurich
>>> Switzerland
>>>
>>> v: +41 44 635 4848
>>> f: +41 44 635 6898
>>> e: mark.robinson at imls.uzh.ch
>>> o: Y11-J-16
>>> w: http://tiny.cc/mrobin
>>>
>>> ----------
>>> http://www.fgcz.ch/Bioconductor2012
>>> http://www.eccb12.org/t5
>>>
>>> _______________________________________________
>>> Bioc-devel at r-project.org mailing list
>>> https://stat.ethz.ch/mailman/listinfo/bioc-devel
> _______________________________________________
> Bioc-devel at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/bioc-devel
More information about the Bioc-devel
mailing list